Filter
Top Products
5-92
Chapter 5
CLI (Command Line Interface)
Offhotconnection
OffhotconnectionOffhotconnection
Offhotconnection
Function This command is used to clear the hot connection mode(Default).
This CLI sets the currently active status, and if the setting needs to be maintained
during system booting, it must be saved in the CLI’s pstnmenu.
Procedure 1. At the SMG-3200 prompt, type 'Offhotconnection,' and press [Enter].
SMG3200:165.213.81.230> Offhotconnection
Off hot connection...
value = 24 = 0x18
SMG3200:165.213.81.230>