Filter
Top Products
7. If a job contains elements out of the memory range, it is ignored.
8. This command cannot be used with the <ESC>AX and <ESC>AR
Expanded Print Length commands or the <ESC>R Rotate,
Moving Base Reference Point command.
9. If the Forms Overlay command <ESC>& is used with a Memory
Card to expand the print area, the Form Overlay length is still
limited to 14".
M-8400RV
Standard Print
Length
1424 dots
7.0 in.
178 mm
Expanded with
<ESC>AX
Command
2848 dots
14.0 in.
356 mm
Maximum Length with Memory Card
(2)
128 Kbyte 1257 dots
6.2 in.
157 mm
512 Kbyte 5038 dots
24.8 in.
629 mm
1 Mbyte 9999 dots
(1)
49.2 in.
1249 mm
2 Mbyte 9999 dots
(1)
49.2 in.
1249 mm
(1) Limited by the number of digits in the command field.
(2) When a Memory Card is used to expand the print length, the card capacity is
used instead of the internal memory, not in addition to the internal memory.
Section 4. Programming Reference
Page 4-849001041 Rev. DSATOM-8400RV