Filter
Top Products
LOADING LABELS, TAGS AND RIBBON
LOADING LABELS OR TAGS
1. Open the Top Access Door by
swinging it up and to the left. Open
the Side Access Door by
swinging it to the rear of the
printer.
2. Open the Print Head Assembly by
pushing the Head Latch toward
the rear of the printer. The Print
Head Assembly is spring-loaded
and will automatically open as
soon as the Head Latch is
disengaged.
3. Loosen the Label Edge Guide and
push it to the outside of the printer
to give the maximum label width.
4. Remove the Label Roll Retainer.
Top Access Door
Side Access
Door
Label Roll
Retainer
Label Hold Down
Label Guide
Sensor
Assembly
Label
Edge
Guide
Print Head
Head Latch
Section 2. Installation and Configuration
SATOM-8400RV9001041 Rev. DPage 2-5