Filter
Top Products
6. After the command has been sent, the unit will beep and print a status label. If it
does not beep and print the label, the printer did not accept the data.
7. If the printer does not beep and print a setting label, turn the printer off, check your
download command stream for errors and start the download process over at
step 1.
8. If the custom codes are correct, press the FEED key to accept them and terminate
the download process. If they are incorrect, turn the unit off without pressing the
FEED key and begin the download process again at step 1.
See Page 4-97, Custom Protocol Command Codes Download for sample command
stream.
STX=7B ETX=7D ESC=25
ENQ=23 CAN=28 NULL=2A
OFFLINE=7E
AUTO ONLINE YES
ZERO SLASH YES
Press the “FEED key to activate
the User Defaults or power the
printer off to ignore them
Appendix E: Custom Protocol Command Codes
SATOM-8400RV9001041Rev.DPageE-3