Filter
Top Products
Gabbbccc(data) Custom Graphics. Allows the creation and printing of graphic images
using a dot-addressable matrix.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal 8 x 8 blocks (001-152)
ccc = Number of vertical 8 x 8 blocks
(001-178 or 001-356 for 14" label)
data = Data to describe the graphic image
Page 4-43
GPaaaaa PCX File. Downloads PCX file to the internal graphics image memory.
aaaaa = No. of bytes to be downloaded (max DOS file size = 32K)
Page 4-45
Haaaa Horizontal Position. Specifies a field’s horizontal location across the
width of the label from the current base reference point. The units of
measurement are dots.
Page 4-59
M-8400RV
aaaa = New Horizontal Position 0001-0832
IDaa Store Job ID. Stores the Job ID number.
aa = Job ID number assigned (01-99)
Page 4-46
J Journal Print. Provides the ability to print text line by line. Fixed
spacing between lines and characters.
Page 4-47
Kab90cc Recall Custom Designed Characters. Recalls for printing a custom
character stored by the Tabcc(data) command.
a=116x16matrix
224x24matrix
b = Indicates the format that data stream was stored in
B Binary
H Hexadecimal
bb = Memory location where the character was stored.
Valid locations are 21 to 52 or “!” to “R” in hex values.
Page 4-21
Laabb Character Expansion. Expands characters in both directions.
aa = Multiple to expand horizontally (01-12)
bb = Multiple to expand vertically (01-12)
Page 4-23
LD,a,b,c,d,e,f,g,i Download Protocol Command Codes. Downloads a user defined set
of Alternate Protocol Command Codes. See Appendix E for details on
the proper usage of this command.
Page 4-97
M Font type. Specifies the 13W x 20H dot matrix font (including
descenders).
Page 4-34
NRotate. Moving Base Reference Point. Sets the original base
reference point and returns printing to normal orientation.
Page 4-70
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
SATOM-8400RV9001041Rev.DPageA-5