Filter
Top Products
ERROR DESCRIPTION INDICATION REMEDY
Low Battery - Low battery
condition is detected when printer
is powered on.
STATUS LED: Red Blinking
Audible Beep: 1 long
Display: Card Low Battery
Depress LINE key to print Card
Status.
Replace Memory Card battery.
Note that all data will be lost when
the battery is removed.
Card R/W Error
1. No card is inserted.
2. Card is write protected.
3. Invalid store/recall number.
4. Card has not been initialized.
STATUS LED: Red
Audible Beep: 1 long
Display: Card R/W Error
Printer must be powered off to
reset.
1. Insert card into selected slot.
2. Remove write protect tab.
3. Correct program
4. Initialize card with BJF command
Warning
1. Duplicate number.
2. Data not in print area.
3. Data overflows card memory.
Audible Beep: 1 short
Display: None
Printer will ignore invalid
commands.
1. Correct program.
2. Correct program.
3. Use card with more capacity.
Appendix D: Optional Features
PageD-69001041Rev.DSATOM-8400RV