Filter
Top Products
REPLACING THE PRINT HEAD
The print head on the M-8400RV printers is a user-replaceable item. If it becomes
damaged for any reason, it can be easily removed and replaced. Contact your local
SATO representative for information on obtaining a new print head.
Supplies needed: No. 2 Phillips screwdriver (a magnetic tip is helpful)
1. Turn the printer off and remove the power cable.
2. Open the Top and Side Access doors.
3. Open the Print Head by pushing the Head Latch toward the rear of the printer.
The Print Head is spring-loaded and will automatically open as soon as the
Head Latch is disengaged.
4. Remove the ribbon from the Ribbon Rewind Spindle if necessary.
5. Remove the Label Cover Assembly by removing the securing screw from the
assembly.
Label Cover
securing screw
Label Cover
Section 3: Cleaning and Maintenance
SATOM-8400RV9001041Rev.DPage3-5