Filter
Top Products
RIBBON: LED, illuminated when ribbon motion sensor does not
detect any ribbon motion (ribbon out).
ERROR: LED, illuminated when there is a system fault such as
an open print head.
ON LINE: LED, illuminated when printer is ready to receive data.
It is turned on and off by toggling the LINE key.
LINE: Momentary switch. Pressing this key toggles the
printer between the on-line and off-line mode. When
the printer is on-line, it is ready to receive data from
the host. This key acts as a pause during a print job by
taking the printer off-line. It can also be used as a
Pause
function key to stop the printer during the
printing process.
FEED: Momentary switch. Pressing this key feeds one blank
label through the printer when it is off-line. When the
printer is on-line, another copy of the last label will be
printed.
DSW: DIP switch array to set operational parameters of the
printer.
LCD: 2 Line x 16 Character LCD display. Used for setting
operational parameters of the printer and displaying
error conditions.
Section 2. Installation and Configuration
SATOM-8400RV9001041 Rev. DPage 2-11