Filter
Top Products
2. Once the correct setting is underlined, pressing the FEED key will accept the
setting and advance the display to the Print Darkeness display.
Print Darkness Type
This selection provides a dual level heat control. The normal setting is Type 1 which
provides head energy control for normal label printing, such as typical shipping
labels. The Type 2 selection provides better control of the head heat for high print
density labels.
1. Use the LINE key to step the underline cusor to either the “1” or “2” selection.
2. Once the correct setting is underlined, pressing the FEED key will accept the
setting and advance the display to the Exit Advanced Mode display.
Exit Advanced Mode
1. Use the LINE key to step the underline cusor to either the YES or NO selection.
2. Once the correct setting is underlined, pressing the FEED key will accept the
setting. If you selected No, the display will return to the initial Advanced Mode
Setup display.
3. If you selected Yes, the printer will return to the normal OFFLINE mode.
Advanced Mode Counters
The Advanced Counters Mode is provided for reading and clearing internal counters.
These counters allow the user to keep track of the number of centimeters of label
material that has passed through the printer, how many labels have been dispensed
or how many lables have been cut. The Advanced Mode Counters in entered by
pressing the LINE key once.
The Counters display allows you to select the counter to be viewed or cleared.
IGNORE CR/LF
YES NO
print darkness
type
1
EXIT advanced MODE
NO YES
advanced mode
Counters
Section 2. Installation and Configuration
Page 2-309001041 Rev. DSATOM-8400RV