Filter
Top Products
14
2. Hardware Implementation of the LUFP7 Gateway
2.1. On Receipt
After opening the packaging, check that the following element is there:
• One LUFP7 Profibus-DP / Modbus RTU gateway.
2.2. Introduction to the LUFP7 Gateway
The cables and other accessories for connecting to Profibus-DP and Modbus networks need to be ordered
separately.
cde
g
f
h
Modbus RTUConfiguration
Legend:
c Detachable power connector for the
gateway (
24V ±10%).
d Female RJ45 connector to a PC
running AbcConf configuration
software.
e Female RJ45 connector for the
downstream Modbus RTU network.
f Six diagnostic LEDs.
g Removable cover for the coding
wheels used to configure the gateway,
shown and described in chapter 2.7
Configuring the Profibus-DP
Communication Features, page 22.
The label describing the LEDs is stuck
onto this cover.
h Female Profibus-DP connector.