Sharp MX-C380 All in One Printer User Manual


 
5-117
SCANNER/INTERNET FAX
Contents
BASIC SCANNING PROCEDURE
You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a
TWAIN* compliant application to scan an image using your computer.
Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to
adjust scan settings as you scan. By contrast, scanning at the machine is most useful for continuous scanning of
multiple originals.
* An interface standard used for scanners and other image input devices. When the scanner driver is installed on your
computer, you can use any TWAIN-compliant application to scan an image.
As an example, the procedure for scanning from the "Sharpdesk" application that accompanies the machine is
explained below.
[At the machine]
Keys in the display can be selected with the arrow keys and the [OK] key.
SCANNING FROM A COMPUTER
(PC Scan Mode)
Scanning in PC scan mode is only possible when the scanner driver has been installed from the "Software CD-ROM"
using the integrated installer. For the procedures for installing the scanner driver and configuring settings, see the
Software Setup Guide.
This function cannot be used when it has been disabled using "Disable Scan Function" in the system settings (administrator).
The procedures for selecting the scanner driver and starting scanning vary depending on the TWAIN-compliant
application. For more information, see the manual for the application or Help.
When a large image is scanned at high resolution, the amount of data will be very large and scanning will take a long time.
Be sure to select appropriate scan settings for the original (text, photo, etc.).
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
When the original is a different size than the size setting, set
the original size.
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (page 5-61)
2
Switch to PC Scan mode.
(1) Select the [Mode Switch] key.
(2) Select the [PC Scan] key.
When PC scan mode is selected, only the [Exit] key displayed in the display can be used on the machine; no other
keys can be used.