Filter
Top Products
6-35
SYSTEM SETTINGS
Contents
OPERATION PANEL (ADMINISTRATOR)
Must Input Next Address Key at
Broadcast Setting
This setting is used to require that the [Next Address]
key be selected before the next address is entered when
performing a broadcast transmission.
When this setting is enabled, the [Next Address] key
cannot be omitted even if the next address is entered
with a one-touch key.
If a user attempts to enter the next address without
selecting the [Next Address] key, a double-beep alarm
will sound and the entry will be rejected.
Scan Complete Sound Setting
The scan complete sound can be selected.
The Number of File Name/Subject/Body
Keys Displayed Setting
Select 6, 12 or 18 for the number of file name/subject
keys that are displayed in the screen.
The Number of Direct Address
Keys Displayed Setting
Select 5, 10, or 15 for the number of one-touch keys that
appear in the address book screen.
Disable Switching of Display Order
This is used to prohibit changes to the order of display
(search number order, ascending, descending) in the
address book.
When this setting enabled, selecting a tab on the
address book screen does not change the order. The
display order will remain fixed at the order that is in effect
when this setting is enabled.
Hold Setting for Received Data Print
(When the Internet fax expansion kit or facsimile
expansion kit is installed.)
This function holds received faxes and Internet faxes in
memory without printing them. The faxes can be printed
by entering a password (factory default setting: 0000)
with the numeric keys.
Password
When [Hold Setting for Received Data Print] is enabled,
enter the password (4-digit number).
Erase Width Adjustment
This is used to set the default erase width for erase
function. Specify a value from 0 mm (0") to 20 mm (1") in
increments of 1 mm (1/8") for edge erase.
These settings can only be configured when there is
no received data in the machine's memory (excluding
data in a confidential or relay broadcast memory box).