Filter
Top Products
STATUS MESSAGES
Status messages are low priority messages that either indicate normal
conditions or provide warnings that need not be acted upon immediately.
These conditions should not occur when the printer is on line. If they do,
however, the alarm will beep and the printer will go off line. For some
conditions however, there is the possibility of a condition occurring when
the printer is on line. If it does, the alann will not sound and the printer will
remain on line.
MESSAGE
MEANING
ACTZONISTATUS
PRINTER
printer is warming up but
-
WARMUP
service call not necessary
ENGINE TEST
operator has initiated a test of
test in progress
the printing
ENGINE RESET
engine is being reset
-
REINITIALIZE
controller software initiali- may occur when printer i:
zation
on line if emulation i!
changed from host
STATUS SHEET
status sheet printout
-
REPRINT LOST PCS retransmission of lost sheets
-
ROTATING FONT
wait for font rotation
may occur when on line
TONER LOW
toner cartridge may need re-
may occur when on line
placing
PRINTER READY
all conditions normal and
-
proper: no unused data in
controller or pages in print-
ing
PRINTER ACTIVE all conditions normal and
-
proper; unused data in con-
troller or pages in printing
99