Filter
Top Products
.
-
l Pressing [ENTER] confirms the change.
l Finally, press the [ON LINE] button to make the Star LaserPrinter
8111 ready for printing.
The Star LaserPrinter 8111 is now ready to receive sheets fed through the slot
on top of the paper cassette’s cover.
Before you start printing, adjust the slot to fit your material. Below the slot
are settings for various standard sized papers. If you are going to use one of
these, simply adjust the slot accordingly. If you are planning to use sheets
of other sizes, place a sample in the slot, and adjust the slot until it holds the
sheet securely without bending it.
Note that it is better to do this before you actually start printing, than to trust
to luck during the process.
If during either manual or automatic feed, you get a paper jam, refer to the
chapter on “Troubleshooting,” for ways to clear the machine.
PAPER SIZE
As the status sheet shows, the Star LaserPrinter 8111 comes set to use letter
size paper. If you want to use other size of paper or envelopes, you must first
instruct the printer. After going off line and pressing [PROGRAM]:
. Press [NEXT] until the screen reads
PAPER FEED
l Press”[ENTER], which will display
FEEDER
l Pressing [NEXT] displays
SIZE
l Press [ENTER], which will display
Paper : Letter
56