Filter
Top Products
1
‘, _
L
.
: . .._
) -
INSTALLING OPTIONAL FONT CARTRIDGES
You may install two optional font cartridges in the slots beneath the paper
cassette, at the front of the Star LaserPrinter 8111 (referred to as slot #l and
slot #2). If the power is off, simply hold one of the cartridges at its label end,
label facing up, and insert it into the slot, pushing it as far back as it will go.
Part of the label end will protrude from the printer’s frame.
If you want to change a cartridge while the power is on, do this:
l Make sure the printer is off line. If necessary, press the [ON LINE]
button until the light is ufi
l Be sum the DATA light is ofl If the light is on, this means the printer
contains material in its memory that has not yet been printed. Press the
[PRINT] button,toprintthismaterial. Whenprintingofallthematerial
in memory is completed, the DATA light will go ofl
l Make the desired cartridge changes.
l Press [ON LINE], so that the light is on, and continue your printing as
desired.
Note: If you attempt to change a cartridge while the printer in on line, the
printer will go off line. The screen will display the message CHECK
CARTRIDGE and the slot number. Replace the cartridge and press
[ERROR SKIP], then [ON LINE], whichmay allow youto continue.
If this doesn’t work, turn the power off, then on again. For mote on this
subject, see “Font/Emulation Cartridge Problems” in the chapter
“Troubleshooting.”
73