Appendix A Physical Characteristics A-7
■ Two -48 VDC power feeds (four signals each; eight signals total)
■ Two IPMB ports (two signals each; four signals total)
■ Geographic address (eight signals)
The analog test and ring voltage pins are left unconnected.
FIGURE A-4 shows the pin
assignments.
FIGURE A-4 Power Distribution Connector (Zone 1) P10
TABLE A-6 lists the power distribution connector pin assignments.
TABLE A-6 Power Distribution Connector Pin Assignments
Pin Number Name Description
1 Reserved Reserved
2 Reserved Reserved
3 Reserved Reserved
4 Reserved Reserved
5 HA0 HA0 Hardware Address Bit 0
6 HA1 HA1 Hardware Address Bit 1
7 HA2 HA2 Hardware Address Bit 2
8 HA3 HA3 Hardware Address Bit 3
9 HA4 HA4 Hardware Address Bit 4
10 HA5 HA5 Hardware Address Bit 5
11 HA6 HA6 Hardware Address Bit 6
12 HA7/P HA7/P Hardware Address Bit 7 (Odd Parity Bit)
113
416
17
20
21
25
26
28
29
27
30
31
33
34
32
24