Sun Microsystems CP3220 Server User Manual


 
1-14 Sun Netra CP3220 Blade Server User’s Guide January 2010
1.7 Technical Support and Warranty
Should you have any technical questions or support issues that are not addressed in
the Sun Netra CP3220 blade server documentation set or on the technical support
web site, contact your local Sun Services representative. This hardware carries a
one-year return-to-depot warranty.
For customers in the U.S. or Canada, please call 1-800-USA-4SUN (1-800-872-4786).
For customers in the rest of the world, you can find the World Wide Solution Center
nearest you at the following web site:
http://www.sun.com/contact/services_solutions.jsp
When you call Sun Services, be sure to indicate if the Sun Netra CP3220 blade server
was purchased separately and is not associated with a system. Please have the blade
server identification information ready. For proper identification of the blade server,
be prepared to give the representative the blade server part number, serial number,
and date code (
FIGURE 1-7).
1.7.1 Locating the Blade Server Identification
Information
The Sun Netra CP3220 blade server part number, serial number, revision number,
and media access control (MAC) address are printed on stickers located on the Sun
Netra CP3220 blade server (
FIGURE 1-7).
The Sun barcode label provides the following information:
Blade server serial number (for example, 1005LCB-07296R0912), which is on the
barcode label
The part number/dash/revision/date code label provides the following
information:
Blade server part number (for example, 3753529), which is the first seven digits on
the part number label
Product dash number (for example, -01)
Revision number (for example, REV: 01)
The MAC address label contains the base MAC address for the blade server in
printed and barcode form. Is it an orange label located below the AMC slots.