Filter
Top Products
1-10 Sun Netra CP3220 Blade Server User’s Guide • January 2010
FIGURE 1-6 Sun Netra CP3220 Blade Server, Backplane, and Relationship to ARTM
Note – When using the Sun Netra CP32x0 ARTM with the Sun Netra CP3220 blade
server, use shielded cables of less than 10 meters in length for serial I/O ports.
Caution – You must use shielded cables for all ports to satisfy EMI compliance
standards.
You can order the CP32x0 ARTM, build a custom module, or buy one from an IHV.
You must set up a minimal set of I/O for a boot path for the host board and for a
path for console I/O to deliver commands and read board and system status.
Possible boot and console configurations are described in
TABLE 1-1. Sun
Microsystems provides the Sun Netra CP3220 blade server and optionally, a
compatible Sun Netra CP32x0 ARTM. This module provides one
Sun Netra CP3220 blade server
Sun Netra CP32x0 ARTM
(installed from the rear)
ATCA backplane
(installed from the front)