Chapter 1 Introduction 1-9
Note – Use only serial cables that are less than 10 meters in length.
FIGURE 1-6 shows the physical relationship between the Sun Netra CP3220 blade
server, the ARTM, and the backplane in a typical ATCA system.
Figure Leg end
1 Serial port
2 10/100/1000 MBASE-T management port
3 External SAS port (secondary)
4 External SAS port (primary)
5 Hard disk drives
6 RTM Alignment pin
7 Zone 3 connectors
8 OK LED
9 Out-of-service (OOS) LED
10 Blue Hot Swap LED