Sun Microsystems Sun Fire V100 Server User Manual


 
86 Sun Fire V100 Server User’s Guide December 2001
Adding Components or Replacing A
Server
For a list of components that are available for the Sun Fire V100 server, see “Optional
Components” on page 4. If there is a fault with any of the components listed below,
replace the whole server. Should you need to do this, contact your Sun sales
representative.
Motherboard
Processor
Power Supply Unit
Fan
CD-ROM drive
The server contains a memory card called the system configuration card. The card
contains the following data:
the only copy of NVRAM
IDPROM
host ID
MAC address
Replacing the System Configuration
Card
The card is removable so that you can transfer the host ID and configuration data
onto a new server, allowing quick and easy server replacement.
To Swap the System Configuration Card (SCC)
Between Servers
1. Make sure that both Sun Fire V100 servers are powered down.
2. Remove the zip ties securing the system configuration cards in both servers, and
remove the cards.
3. Insert the system configuration card from the old server into the new one.