Sun Microsystems Sun Fire V100 Server User Manual


 
88 Sun Fire V100 Server User’s Guide December 2001
your area. You can then arrange to return the system to Sun for repair under the
terms of your warranty or you can order the components and have them installed by
your own qualified service engineers.
Caution The system contains electronic parts that are extremely sensitive to static
electricity. Do not touch any metal parts. Place the system on top of an electrostatic
discharge (ESD) pad (see
FIGURE 8-2). Use the disposable antistatic wrist strap
supplied with the system, and attach it to the metal base of the system before
touching any of the internal components.
Caution Before attempting to remove the cover, make sure that the server is
powered off and that the power cord, and all other cables, have been disconnected
from it.
FIGURE 8-2 Using the Disposable Antistatic Wrist Strap Supplied With the System
To Change Components In a Sun Fire V100
Server That Is In Use
If the system is currently in use and you need to open it to install a component:
1. Shut down the Solaris environment from the console.