Sun Microsystems Sun Fire V100 Server User Manual


 
38 Sun Fire V100 Server User’s Guide December 2001
If you are at the lom> prompt, go to the ok prompt by typing:
1. Boot the server into the Solaris environment by typing:
2. At the Solaris prompt, type:
3. When prompted to confirm that you want to create a “blank” server, type y.
4. When the server has unconfigured itself, type the LOM escape sequence. By
default, this is:
When the lom> prompt appears, follow the instructions in one of the following
sections:
“To Power On With the Server’s Details Registered at a Name Server” on page 34
or
“To Power On Without the Server’s Details Registered at a Name Server” on
page 35.
“To Power On a Standalone Server for the First Time” on page 37
lom> break
ok boot
# sys-unconfig
# #.