Sun Microsystems Sun Fire V100 Server User Manual


 
8 Sun Fire V100 Server User’s Guide December 2001
Choosing Between a Rack and a Cabinet
The Sun Fire V100 server can be installed in either a rack or a cabinet. Factors that
might influence your decision include:
Security
If other people have access to the room in which your servers are located, you can
increase security by locking the servers in a cabinet.
Thermal issues
Cabinets often require additional fans, because the systems installed in them
generate heat in an enclosed space. Two-post racks, however, may require no
special cooling systems.
Flooring
Two-post telco relay racks are designed so that cables can be run overhead.
Cabinets often require cables to be run under the floor.
Installing the Sun Fire V100 Server Into a
19-Inch Wide or 72-inch Tall Four-Post
Rack
The 19-Inch Rackmounting Kit
The mounting slides can each be used on either side of the rack. The parts required
are listed in
TABLE 2-1. The part number of the rackmounting kit is X6919A.
TABLE 2-1 19-inch Rackmounting Kit
Item Quantity Part No.
Front slide 2 340-6125
Rear slide 2 340-6234
Cable management bracket 1 340-6151
M4 nuts 4 240-1373
Rack screw kit 1 565-1645