Sun Microsystems Sun Fire V100 Server User Manual


 
iv Sun Fire V100 Server User’s Guide December 2001
Connecting to the Server Using a Sun Workstation or ASCII Terminal 23
Connecting to the Server Using a Terminal Server 25
Connecting to a Cisco Terminal Server 25
Connecting to Other Terminal Servers 26
Connecting to the Server Using a System Running Microsoft Windows 27
Connecting to the Server Using a Handheld Device 29
Using the Arrow Keys 31
4. Powering On and Configuring the Sun Fire V100 Server 33
Powering On and Configuring the Server 34
Using the Power (On/Standby) Switch 39
5. Managing the Sun Fire V100 Server From the lom> Prompt 43
Introduction to Lights-Out Management 43
Using LOM Commands 44
Powering On or Resetting the Server From the LOM Shell 45
Controlling the Server’s Booting Behavior 47
Monitoring the Server From the LOM Shell 49
Viewing the LOM Event Log 51
Verifying That a Component Has Been Fixed 53
Setting Up LOM Privileges for Named Users 54
Permissions Available for LOM Users 54
Setting the LOM Configurable Variables 58
Separating LOM From the Console on the Serial A/LOM Port 60
Viewing Event Reports That LOM Sends to syslogd 61
LOM Shell Command List 62
6. Managing the Sun Fire V100 Server From the Solaris Prompt 65
Monitoring the System From the Solaris Prompt 66