Filter
Top Products
Chapter 5 Managing the Sun Fire V100 Server From the lom> Prompt 59
● Turn the alarm off by typing:
where n is the number of the alarm you want to turn off: 1, 2, or 3.
Alarms 1, 2, and 3 are software flags. They are not associated with any specific
conditions, but are available to be set by your own processes or from the command
line. For more information, see “To Turn the Alarms On and Off (lom -A)” on
page 76.
▼ To Stop LOM Sending Event Reports to the
Serial A/LOM Port
● Enable event reporting by typing:
Note – This is the equivalent of using the lom -E on command from the Solaris
shell. For more information, see “To View the Event Log (lom -e)” on page 72.
● Disable event reporting by typing:
Note – This is the equivalent of using the lom -E off command from the Solaris
shell. For more details, see “To Stop LOM From Sending Reports to the Serial A/
LOM Port (lom -E off)” on page 77.
lom> alarmoff n
lom> event-reporting on
lom> event-reporting off