Filter
Top Products
22
VISION 5000 Videoconferencing SystemInstallation
How to prepare a typical room for videoconferencing
The diagram below shows a typical room designed to obtain the best results when using the Vision 5000.
1
1–3:
Prestored camera views
2
3
Grand Vison
Leader
Board
Microphone
Table
Document camera
The microphone should be placed at the front of
the table to ensure that all speech will be
detected. The best position for the microphone is
at least 2 meters (6.5 feet) in front of the Vision
5000 on a plain, flat table with at least 0.3
meters (12 inches) of table in front of the
microphone.
The document camera should be close to the
leader or a designated controller of the
document camera for ease of use. (Remember to
arrange all the peripherals so that one participant
can reach each of them to point, change the
display, tape, and so forth).
The camera supports up to 15 pre-stored camera
positions. The illustration shows three possible
camera positions. One of all the participants, one
of the whiteboard and one of the main speaker.
The remaining presets are then available for
other peripheral equipment, for example: a VCR.
Position the Vision 5000 in such a way as to
avoid the possibility of somebody inadvertently
walking into the cameras field of view when
entering the room. Other than the conference
participants there should be no moving items in
the sent image.
Vision 5000