Filter
Top Products
58
VISION 5000 Videoconferencing SystemAdvanced use
Alert Tones & Volume
======= Alert Tones & Volume ======
Video Call Alert Tone: A B C D E F
Telephone Alert Tone: A B C D E F
Alert Volume (0=min): ||| 8
Alert Speaker: Off On
Previous Menu
To help distinguish between incoming video calls and ordinary telephone calls, different ringing tones may
be selected. You may also select different volume levels for the ringing tone.
Alert Speaker
The Vision 5000 also has an internal, call alerting speaker. When selected On the internal speaker will warn
you of an incoming call even though the monitor may not be switched on.
Restore Audio Defaults
There are many audio settings. It is easy for the user to configure the codec to be unusable. Therefore it is
possible to set all audio settings back to default settings by using Restore Audio Defaults.
Avoid putting paper sheets etc. on the microphone.
Avoid moving the microphone or loudspeaker.
In the event of poor echo cancelling, allow the canceller to adapt. After each change, the echo canceller
requires a few seconds to adapt. Do not change settings etc. without allowing the canceller to adapt to
the new settings.
In the presence of low frequency noise, enable the noise reduction (NR).