Filter
Top Products
VISION 5000 Videoconferencing System
33
General use
Sending/receiving graphics
When a still image is sent, received or requested, it will be stored in the graphics memory.
One high-quality image (4xCIF) can be stored in memory. When a new image is sent or received, the old
image will be overwritten.
Sending a still image
Press
GRAPHICS
FREEZE
. The outgoing video is frozen when Freeze is displayed on the screen. The video remains
frozen until the key
GRAPHICS
FREEZE
is pressed again (not if calling to a dual monitor system).
Note
If a still image from another video source is sent, please check your Presentation Settings. See below.
Dual Monitor
Using a dual monitor system and with Dual Monitor: On selected in the Video Output menu, the still image is
automatically shown on the dual monitor until
SELFVIEW
is pressed. Use
SELFVIEW
to toggle between selfview and still image
on
the dual
monitor.
To send a still image from another video source (e.g. the document camera), press
VIDEO
SOURCE
, use
UP
and
DOWN
to highlight the video source and press
GRAPHICS
FREEZE
. See Presentation Settings below for automatic setup of
this operation.
Requesting a still image
Press
FAR END
CAMERA
until the FarEndCamera on screen indicator is displayed.
Press
GRAPHICS
FREEZE
. The still image is automatically displayed, press any key to return to normal view (single
monitor).
Dual Monitor
Use
SELFVIEW
to toggle between selfview and still image on
the dual
monitor.
To request a still image from another video source, press
VIDEO
SOURCE
, use
UP
and
DOWN
to highlight the video
source and press
GRAPHICS
FREEZE
.