Filter
Top Products
84
VISION 5000 Videoconferencing SystemPeripherals
Video Cassette Recorder (VCR)
Vision 5000: Video Input 5
VCR: Video Output
Vision 5000: Video Output 2
VCR: Video Input
Vision 5000: Audio Output 3
VCR: Audio Input
Vision 5000: Audio Input 6
VCR: Audio Output
VCR - Playback
For playback, connect a cable between Video Out on the VCR and VideoIn 5 (VCR) on the system and
from Audio Out on the VCR to AudioIn 6 (VCR) on the system.
Select correct video input on the system using
VIDEO
SOURCE
. Make sure that Audio In 6 (VCR) is On (see Audio
Setup. If audio from VCR is too low, this level can be adjusted in Audio Setup, Inputs, Level Settings.
The audio from the VCR will be audible in the local speaker system.
The audio from the VCR and your microphone(s) will be mixed and sent to the other side. When a person
talks the VCR level will be reduced to make it easier to comment a video recording (when Audio Setup,
Mix Mode: Auto).
VCR - Recording
When recording, the VCR will record the video as showed on the main monitor, the local audio and the
audio from the other side.
When recording a videoconference, connect a cable between VideoOut 2 on the system and Video In on
the VCR. Connect a cable between AudioOut 3 on the Vision 5000 to Audio In on the VCR.
VCR
To simplify connecting a VCR, the
necessary connectors are marked VCR