Filter
Top Products
VISION 5000 Videoconferencing System
73
Advanced use
Dataport 1 supports 4 different modes:
Data
Control
Modem
T.120
Data mode
Provides a transparent data channel. This channel can be used for many different purposes such as file
transfer, application sharing and more. When using this mode, it is necessary to have a Tandberg system at
the remote site.
Control mode
The control interface provided by the Dataport supports a subset of the Hayes command set as well as a
comprehensive set of Vision 5000 specific commands.
This mode maintains communication with the Dataports command interpreter at all times. All features
available from the hand-held remote control can be accessed through the dataport.
Modem mode
Allows you to control the Vision 5000 externally via a PC as in Control Mode. Once a call is established
Dataport 1 will automatically switch to Data mode. When the call disconnects, Dataport 1 switches back to
Control Mode.
T.120
Provides you with a data channel supporting the T.120 standard for data communication. Using T.120
software on your PC, you can communicate with other T.120 systems using your PC and your Vision 5000.
For more details on connecting to the Dataport, see Peripheral Equipment.