44
VISION 5000 Videoconferencing SystemAdvanced use
Utilities
============ Utilities ============
Autoanswer: Off On
Do Not Disturb: Off On
Far End Camera Control: Off On
Hotline: Off On
Automatic Call-up: Off On
MCU Status Line: Off On
Systemname: _____________
Presentation Settings
Diagnostics
Previous Menu
Autoanswer
If autoanswer is set to Off, you must manually answer all incoming calls by pressing the
SEND
or the
ACCEPT
END CALL
key.
When Autoanswer is set to On, the system will automatically answer all incoming calls after the first ring.
Do not disturb
Do Not Disturb On will remove all audible and visible indications of incoming calls. The caller will hear a
busy ringing tone when calling this unit. The function can be activated while the system is not in a call.
Pressing any key will turn off Do Not Disturb.
Far end camera control
When Far End Camera Control is On, the other side will be able to:
Control your camera (if controllable)
Select your video sources
Activate your presets
Request still images
When set to Off none of the four features above can be accessed by the other side, however you will still be
able to control the remote side.
Hotline
When the hotline function is On, pressing the
SEND
or the
ACCEPT
END CALL
key will automatically dial the number stored in
index 01 in the Directory. When Hotline is active you cannot use the number keys for dialling. You may still
use the Directory to dial any of the other pre-stored numbers.