Filter
Top Products
90
VISION 5000 Videoconferencing SystemAppendix 2
The cable set consists of a pair of RS-366/V.35 cables cable and should be connected thus:
Configuration of Vision 5000
Press
MENU
on the remote control. Select Terminal Settings.
Select Current Network: External and check the following:
==== External Network Settings ====
Call Control:
RS366 Dialling
Leased Line
Data Triggered
Manual
Network Clocking:
RS449/V35 Compatible
X21 Compatible
Advanced Network Settings
Previous Menu
==== Advanced Network Settings ====
IMUX Default Prefix, Net1: _____
IMUX Default Prefix, Net2: _____
IMUX Restrict Offset: ___
Previous Menu
Clear the IMUX Default Prefix, Net1, IMUX Default Prefix, Net2 and IMUX Restrict Offset.
If the CSUs are connected and configured properly (see next page), you are now ready to make your videoconferencing calls.
Net 1
Net 2
RS-366
V.35
RS-366
V.35
RS-366
VISIONCSU’sWall Socket
Circuit #1
Circuit # 2
Master Vision 6000
Using CSU/DSUs
Connect the RS366/V35 cable to NET 1 and CSU#1
Connect the RS366/V35 cable to NET 2 and CSU#2 .
Vision 5000
V.35/RS-366 cable
Signal Name Female Male 34pin Male 25pin
44pin DSUB Winchester DSUB
Frame ground 1 A
Signal ground 15,25,28,44 B
TX(A), transmit data 29 P
TX(B) 30 S
RX(A), receive data 40 R
RX(B) 39 T
RCLK(A), rcv clock 37 V
RCLK(B) 38 X
TCLK(A), xmt clock 41 Y
TCLK(B) 42 AA
DTR 7 H, C
RI 43 L, J
RLSD 36 F
DSR 6 E
RS366 DPR 9 2
RS366 ACR 10 3
RS366 CRQ 11 4
RS366 PND 12 5
RS366 DLO 13 22
RS366 NB1 21 14
RS366 NB2 22 15
RS366 NB4 23 16
RS366 NB8 24 17
RS366 DSC 14 13
RS366 GND 35 7