Filter
Top Products
62
VISION 5000 Videoconferencing SystemAdvanced use
Video output
========== Video Output ==========
Auto-PIP: Off On
Still Image Filter: Off On
Auto-Display Still Image: Off On
Dual Monitor: Off On
Output 1-3:
Interlaced
Non-Interl.
Output 4-5:
Interlaced
Non-Interl.
Previous Menu
Auto-PIP
Select On to automatically display a PIP whenever the camera position or video source is changed and to
have the remote site appear in PIP when in full screen selfview.
Still image filter
Select On to remove any instability in the high quality still image.
Auto-display still image
Select On to automatically display a received still image. If this selection is Off, you will have to press
VIDEO
SOURCE
and 0 to display a still image.
Dual Monitor
Select On to show selfview and still images on the 2nd monitor. Toggle with
SELFVIEW
. If Off, the 2nd monitor
shows selfview only. See section Sending/receiving graphics for further information.
Output
If your external equipment requires an interlaced signal you can select it here. Outputs 1-3 provide the same
signal as your main monitor. Outputs 4-5 provide the selfview/still image signal used on the 2nd monitor.