Filter
Top Products
88
VISION 5000 Videoconferencing SystemAppendix 1
Appendices
Appendix 1: Connecting Vision 5000 to ISDN using NT1 network
adapters
Connecting
Connect the first ISDN cable from ISDN 1 on the codec to the S-interface on your first NT1 network adapter. Connect the second,
third and fourth ISDN cable to the appropriate NT1 network adapters.
Connect the U-interface of your NT1 adapter to the line provided from your network provider.
For convenience the NT1 adapters could be placed inside the cart. If needed, use the shorter ISDN cable (RJ45 connectors)
delivered with the NT1 between the codec and the NT1 and the longer ISDN cable between the NT1 and the connector (RJ45) at
the wall socket.
Configuring
The configuration of the codec is performed in the same manner as described in ISDN BRI Settings.
The NT1 should be powered up and you should check that the network is active. Please check your NT1 User Manual.
ISDN
1
2
3
4
NT1
U S/T
U-interface
S/T-interface
Wall
Vision 5000
NT1
U S/T
NT1
U S/T
NT1
U S/T
NT- 384 (NT-1 triple)