Filter
Top Products
76
VISION 5000 Videoconferencing SystemEthernet
Ethernet Functionality
The system supports TCP/IP connectivity over Ethernet. The following functionalities are supported:
Control of the system via a standard WWW-browser
Dataport access using Telnet (described in the document Dataport User Guide)*.
Software Upgrade using WWW-browser or FTP (described in the document Upgrading Software)*.
SNMP (Simple Network Management Protocol) (MIB-II)*.
WWW-interface
It is possible to access the system remotely via a local area network (LAN) using a standard WWW-
browser.
LAN port
LAN port
What is needed
PC with a WWW-browser.
Ethernet cable (RJ-45).
LAN-network port.
NOTE: You should not connect the PC directly to the
codec. The connection should always go through a local
area network.
Local Area
Network - LAN
* - Please contact your dealer for further information.