Filter
Top Products
VISION 5000 Videoconferencing System
35
General use
Far end camera control (FECC)
Press the
FAR END
CAMERA
key until the FarEndCamera on-screen indicator is displayed.
For this feature to operate the remote side must support Far end camera control (H.281).
Whilst activated you will be able to control the remote sides camera (pan/tilt/zoom/focus) and presets.
To control the remote camera use the keys below:
UP
RIGHTOKLEFT
DOWN
for pan/tilt, and
ZOOM
for zooming,
FOCUS
for focusing.
Remote presets can be activated by pressing the keys
P4P3P2P1
or the keys 0-9 to activate presets P0-
P9.
Selection of remote videosources is achieved by pressing
VIDEO
SOURCE
when in FarEndCamera mode and selecting
the desired video source from the menu.
Note
You cannot store presets on the remote side and some units do not support ten presets.
To prevent others from controlling your camera, select Far End Camera Control:Off in Utilities
Advanced use.