Filter
Top Products
30
Health Care System IIIGetting Started
Getting Started
System start-up
Your system should be in standby mode. When in standby mode, pressing any key or picking up the remote
control will wake up the system. An incoming call will also wake up the system.
If the system does not respond, check that all equipment is powered on. If the equipment is not on, make sure
that the power cord of the main HCS III cart is plugged in. Switch on the monitor by pressing the power
button on the front of the monitor and ensure that line B is selected. Likewise, press the power buttons on the
optional LCD display and computer. The optional mobile camera cart is powered as long as its cable is
plugged into the rear interface panel on the main HCS III cart.
Welcome menu
After a user-definable boot-up logo is shown, the following menu is shown. This menu should provide
you with the most important system information. For further system information, select the Quick key
‘System Info’.