Filter
Top Products
Health Care System III
33
Getting Started
connect
menu
THESE SETTINGS ARE ESSENTIAL
FOR OPTIMAL SYSTEM SET-UP.
NOTE
System configuration
• After the system has performed a self-test routine, product logo and a ‘Welcome’ menu will be displayed
on the monitor.
• Enabled but unused ISDN lines (lines not active) should be disabled. Select the Quick Key ‘System Info’
(on the remote control) to view line status.
PRESS MENU ON THE REMOTE CONTROL. SELECT THE MENU ‘TERMINAL SETTINGS’, ‘NETWORK’, ‘ISDN-BRI SETTINGS’.
SELECT THE RELEVANT ‘LINE SETUP’ MENU AND SET ‘ENABLED: OFF’.
• Enter System Name to identify the system during an MCU conference. Select ‘Utilities’, ‘System Name’
and enter the name using the number keys (as on a mobile phone).
• Select the language you want to use in ‘Terminal Settings’, ‘Language’.
• If you are using two monitors, set ‘Utilities’, ‘Dual Monitor: On’.
• To activate MultiSite and/or Presenter, enter an option key (see paperwork accompanying your system),
see ‘Terminal Settings’, ‘Software Options’.
• Press Connect on the remote control. A dial tone should be heard if the network is active.
• Using the monitor remote control, adjust the volume on the monitor to a level of your choice.
This volume will be the default volume for all calls.