Filter
Top Products
Health Care System III
69
Advanced Use
Camera Tracking Mode
Select the camera tracking mode:
Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle
images are preferred over close-up images.
Norm: Should be used in regular meetings.
Fast: The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over
wide-angle images.
THE CAMERA TRACKING MODE
ENTRY
WILL BE GREYED OUT IF NOT
USING THE WAVE CAMERA.
Document Camera
Users of a document camera with S-video output can configure the system to activate an S-video input when
pressing ‘doc cam’ on the remote control.
Video2: Video Input 2 (S-video) will be activated when pressing ‘doc cam’ on the remote control.
Video3: Video Input 3 (Composite) will be activated when pressing ‘doc cam’ on the remote control.
Video Settings
PC
Configure what should be activated when pressing PC.
VGA: Pressing PC will activate the VGA input on the system (default).
VNC: Pressing P
C will use VNC to show images from your PC (see ‘VNC Settings’ for further information).
NOTE
Focus
To manually adjust the focus select ‘Manual’ and use the arrow keys to adjust.
Brightness
To manually adjust the brightness select ‘Manual’ and use the arrow keys to adjust.
Whitebalance
In Auto mode the whitebalance is continuously updated. To update the whitebalance manually, select
‘Manual’ and press OK.
A WHITE OBJECT SHOULD BE HELD IN FRONT OF THE CAMERA A FEW SECONDS BEFORE AND AFTER SELECTING MANUAL WHITEBALANCE.
TIP