Filter
Top Products
Health Care System III
53
General Use
Web-interface
It is possible to access and maintain the system remotely via a local area network (LAN) using a standard
Web-browser.
Connect your system to a local area network.
Configure your codec:
• Press MENU, select ‘Terminal Settings’, ‘LAN Settings’
• Specify IP-assignment ‘DHCP’ or ‘Static’. If DHCP is selected no other settings are needed. If Static is
selected, ‘IP-address’, ‘IP-subnet mask’ and ‘Gateway’ must be specified.
Example:
IP-assignment: Static
IP-address: 196.9.200.129
IP-subnet mask: 255.255.255.0
Gateway: 196.9.200.21
See ‘LAN Settings’ in ‘Advanced use’ for further information.
• Start your Web-browser. In the address field type the IP-address of the codec. The Web-page of the codec
will be shown.
LAN Port
Local Area Network
LAN
Rear Interface Panel
LAN Port
THE SYSTEM MUST BE RESTARTED BEFORE CHANGES IN THE
‘LAN SETTINGS’ MENU CAN TAKE EFFECT.
NOTE
Text Chat / Closed Captioning
While in an ISDN or IP call to another system supporting Text Chat (T.140), select ‘Text Chat’ from the
Web-page of the codec. Enter text in the window displayed. When selecting ‘Send Text’, the text will be
displayed on the local and far-end monitor as shown below:
The local Text Chat window can be closed manually from the Web-interface by pressing ‘Close Window’ or
it will close automatically after a few minutes without activity.