Filter
Top Products
Health Care System III
93
Appendix 1
Appendix 1
Connecting the HCS III to ISDN using Network Adapters
Connecting
When network terminating units are required, Inter-Tel Inc. models NT1 or NT384 are installed within the
enclosed area at the bottom of the cart, as illustrated below.
Connect the ISDN BRI cables from the sockets labelled ISDN BRI 1/2/3/4/5/6 on rear interface panel of the
HCS III cart to the network provider sockets.
Configuring
The configuration of the codec is performed in the same manner as described in ISDN BRI Settings.
The NT1 should be powered up and you should check that the network is active. Please check your NT1
User Manual.