Filter
Top Products
Health Care System III
37
Getting Started
Selecting / setting default network
To select a specific network, press ‘Net’ when you are in the dial menu.:
• Highlight network to be used in your call.
•Press ‘Select’ to select network or press ‘Set as Default’ to set the selected network as your preferred choice
for this and all subsequent calls.
If ‘Auto’ is selected, the system will select a network based upon the following criteria:
• If an IP-address (e.g. 123*3*0*12 ) is entered, ‘LAN’ (H.323) is selected.
• If the first digits in the number are the same as set in ‘H.323 Prefix’ under ‘H.323 Settings’, ‘LAN’ is
selected.
• In other cases, ‘ISDN’ (H.320) is selected*.
If you want to assign a specific prefix to the network selection or if you want to define your own network
configuration, see ‘Network Profiles’ in ‘Call Settings’, ‘Terminal Settings’.
* - ISDN indicates both ISDN-BRI, ISDN-PRI, Leased E1/T1 and External Networks.
Answer a call
To answer a call, press the CONNECT key.
Manual answer of a call is needed if the autoanswer facility is switched off. See ‘Utilities’ in
‘Advanced use’.
End a call
To end a call, press the DISCONNECT key.
Correcting keying mistakes
To delete the last digit (or character) entered, press the DELETE key.
ENDING A CALL
SWITCHING OFF THE MONITOR(S) WILL NOT
DISCONNECT
A CALL. TO DISCONNECT A CALL YOU
SHOULD PRESS THE DISCONNECT KEY.
connect
delete
TIP