Health Care System III
73
Advanced Use
ISDN-BRI Settings
MANDATORY ISDN-BRI SETTINGS
TO MAKE SURE YOUR SYSTEM WILL WORK PROPERLY USING ISDN-BRI, MAKE THE FOLLOWING SETTINGS:
- SET ISDN SWITCH TYPE
- ENTER ISDN LINE NUMBERS (+ SPIDS IF REQUIRED)
- DISABLE UNUSED LINES
ISDN Switch Type
Select the type of ISDN network connected to your unit.
SOME SOFTWARE VERSIONS DO NOT SUPPORT 6
ISDN LINES, THEREFORE SOME OF THE LINE
SETUP LINES MAY BE GRAYED OUT.
IF NATIONAL ISDN IS SELECTED, PRESS THE
QUICK KEY ‘AUTO BRI CONFIG’ TO
REQUEST
AN AUTOMATIC CONFIGURATION OF
THE
LINE & SPID SETTINGS (SWITCH MUST
SUPPORT GR-2941-CORE).
1TR6 SHOULD ONLY BE USED IF YOU ARE
OPERATING THE SYSTEM BEHIND A PABX.
NOTE
NOTE
NOTE
NOTE