Health Care System III
41
General Use
move pip
Press MOVE PIP to move your selfview as a Picture-in-Picture to different corners of the screen
or to switch it off.
Adjusting volume
Press the
V
OLUME
keys to adjust the volume level. An on-screen indicator will show the current
level.
View outgoing video (selfview)
Press the S
ELFVIEW
key to view your outgoing video.
To change the image being viewed on the monitor during a call press S
ELFVIEW
until the desired image is
shown (far end/selfview/still image or Duo Video).
+
-
selfview
mic off
Microphone on/off
To mute your microphone during a call, press MIC OFF. An on screen indicator will appear when
the microphone is off. Pressing M
IC OFF one more time will activate the microphone again.
MIC OFF WILL MUTE AUDIO INPUTS MIC1-3 AND AUDIO4. IT WILL NOT MUTE AUDIO FROM THE AUX AND VCR INPUTS.
General use
Do Not Disturb / Sleep Mode
Press any Quick key when not in a call to activate the Quick Menu.
When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy
tone when calling this unit. A status line will indicate when Do Not Disturb is active.
When Sleep Mode is selected, the following quick-keys are displayed:
Pressing ‘Sleep Now’ puts the monitors in sleep mode. The system will still accept incoming calls.
Pressing ‘60 Minutes’ or ‘3 Hours’ will delay entering sleep mode accordingly.
Pressing any key or picking up the remote control will deactivate Do Not Disturb/Sleep Mode.
To see numbers, line status etc., select ‘System Info’. For further information see ‘Diagnostics’ in
‘Advanced use’.
TIP