Filter
Top Products
228
Using ConfigFree™ with your Toshiba Computer
ConfigFree Utilities
5.375 x 8.375 ver 2.3
Because the wireless LAN’s default connection setting is for Ad Hoc
mode, the Toshiba Wireless Projector will not connect if the projector
is set to Infrastructure mode. If this occurs, you can change the
wireless LAN’s connection setting to Infrastructure mode to match
the settings on the projector.
(Sample Image) Projector icon when connected with Quick Connect
If the wireless mode for the wireless setting is set for 5 GHz
(802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b)
and then connects to the projector.
The wireless LAN configuration returns to the settings that were
last used before the Quick Connect function was started:
❖ If the Toshiba Wireless Projector utility is closed.
❖ If you select Toshiba Wireless Projector (DPJ) from the
ConfigFree tray menu (this disconnects the wireless LAN
connection).
❖ If you select a profile from the ConfigFree tray menu or when
you disable a wireless device.
❖ If you close ConfigFree.
Direct Link Toshiba Device
When Access Point is not available, use the Direct Link Toshiba
Device feature to connect your computer in Ad Hoc (peer-to-peer)
mode and use the Summit feature.
NOTE