Filter
Top Products
2.14 Bluetooth Troubleshooting 2 Troubleshooting Procedures
Procedure 2 Connection Check
The Bluetooth function wiring diagram is shown below:
Any of the connections may be disconnected. Disassemble the computer following the steps
described in Chapter 4, Replacement Procedures, and perform the following checks:
Check 1 Make sure the Bluetooth module is firmly connected to CN4400 on the system
board.
If the Bluetooth module FPC is disconnected, connect it firmly. If the Bluetooth
module is still not functioning properly, go to Procedure 3.
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 2-51