Filter
Top Products
4.30 CAMERA MODULE/Antenna 4 Replacement Procedure
Installing the CAMERA MODULE/Antenna
To install the CAMERA MODULE/antennas, follow the steps below and refer to Figure 4-51
to 4-53.
CAUTION: Do not reuse the removed CAMERA MODULE/antennas and INSU ANT
HOLD Ss. Use new ones.
1. Stick new INSU ANT HOLD Ss on the LCD COVER ASSY aligning to the guide
lines (dotted lines) as shown below.
INSU ANT HOLD S
INSU ANT HOLD S
Figure 4-53 Removing the CAMERA MODULE/Antenna (3)
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-81