Filter
Top Products
3.32 SETUP 3 Tests and Diagnostics
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 3-95
(d) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCI Sets AHCI which is the mode for VistaTM (default)
Compatibility Sets the mode for legacy OS. Use this mode when the
driver corresponding to AHCI is not used.
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
11. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external monitor
for simultaneous display.
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
12. Peripheral
Use this option to select the peripheral’s mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.