Filter
Top Products
15
(to the next page)
5.
Insert the cassette along the guide rail.
Insert the cassette until it clicks securely into position.
The lever returns to its original position.
• The cassette containing the ink
ribbon is heavy. Hold the cassette with both hands
when you set or take out the cassette.
• If the cassette unit is not set properly into position
before printing, horizontal lines may be printed with
the image.
6.
Close the printer door.
If you want to mount the retransfer film, keep the door
open and go to the next page.
Guide rail
CAUTION
Ink Run Out
Ink Search
Ink Broken
Memo
When the ink ribbon is wound up to the end,
appears on the LCD panel.
After replacement press the RESET button, then
press the ENTER button.
If the ink ribbon is not set properly,
or
appears on the LCD panel. When these messages
are output, check:
ⅷThe ink ribbon is firmly inserted into the bobbin
holders.
ⅷThe ink face of the ribbon is directed correctly.
ⅷThe feeding and winding bobbins are mounted
correctly.
Memo
To mount the ink ribbon which is partially used, set
the unused portion of the ribbon (yellow bobbin) on
the bobbin holder indicated with an arrow on the
seal of the cassette.
Printing with the ink ribbon set improperly may cause
the image to be faint.