Filter
Top Products
7
(to the next page)Before use
Product features
ⅷThis card printer allows printing of high-quality, full-
color images equivalent to photographic quality onto
standard size (ISO 7810 compliance) plastic cards
using sublimation type transfer printing.
ⅷUse of sublimation type retransfer printing enables
printing of cards other than those made of PVC and
non-contact IC cards, etc. with uneven surfaces that
were previously difficult to print directly.
ⅷPrinting with no margins on all sides is possible.
ⅷThe host interface utilizes SCSI (asynchronous)
mode. The unit has a built-in SCSI bus terminator.
Checking accessories
Please check for any missing accessories when
opening the box.
ⅷPower cord: AC120V type: · · · · · · · · · · · 1 unit
(For North America)
AC220V-240V cord:· · · · · · · 1 unit
(For Europe)
ⅷCleaning card : 1 unit
ⅷCard stacker : 1 unit
ⅷInstruction manual : English · · · · · · · · · 1 unit
ⅷInk ribon cassette : 1 unit
ⅷRetransfer film : 1 unit
cassette
ⅷFerrite core : 2 units
(Standard model : 1 unit,
built-in IC encoder model : 2
units)
ⅷBinder(for securing : 4 units
the ferrite core) (Standard model : 2 units,
built-in IC encoder model : 4
units)
ⅷJog lever (inside the card tray)
: 1 unit
Some card materials may not be suitable for printing. Consult
your dealer regarding the materials to be used and
specifications required before purchase.
Handling of transfer film,
ink ribbons and cards
Handling
Take note of the following points when handling print
media (retransfer film and ink ribbons) and cards.
• Use of bent or damaged cards may result in card
feed error.
• Do not touch the print media or the printed surface
of cards directly with the hands as this may cause
blurring of the print.
• Foreign materials on the printing area may result in
misprints. Always load the print media and cards in
a clean environment.
• Static build-up in the print media or cards can
cause errors. To avoid causing static electricity, do
not rub cards together.
• When replacing or replenishing print media or
cards that have been stored at low temperatures, let
the print media or cards sit for at least one hour at
the same temperature as location where the printer
is to be used before use. Using print media or cards
as they are may cause condensation and result in
malfunction or print errors.
Storage
The storage condition of the print media (retransfer film
and ink ribbons) and cards may have a strong
influence on the print quality. Select a storage location
that fits the following criteria:
Storage environment
Storage temperature : 5°C to 25°C
Storage environment relative humidity : 40% to 60%
Storage location
To avoid deterioration of the print media, do not store
in the following locations:
• Locations exposed to direct sunlight
• Locations with high humidity
• Locations near organic solvents or diazo copiers.
Storage period
Use within one year.